Comments for Hearn Garage

Comment on TEAC Legacy 800 Review by admin

admin — Mon, 15 Feb 2010 00:28:38 +0000

Back from several hours with a [very good] friend and the amplifier seems to be more or less behaving itself. That is to say it’s been used for around 6 hours and not gone into protect mode. There was a bad joint under one a small capacitor on the PSU board and one of the large capacitors looked a bit domed. There still remains an issue where the unit will not power on correctly (relay switching on/off for a while) but once something latches it’s OK in standby. Will try to get a service manual from TEAC in order to diagnose this further and I’ll post an update with details of what is found!

Comment on Visual Studio 2010 Beta 2 available by Hearn Garage » Blog Archive » Silverlight 4 beta available

Hearn Garage » Blog Archive » Silverlight 4 beta available — Thu, 19 Nov 2009 20:46:35 +0000

[...] For those of you who love to code on the bleeding edge, check out the beta release of Silverlight 4. Please note that the development environment is limited to Visual Studio 2010 (see last post). [...]

Comment on EA tool coming soon by admin

admin — Mon, 09 Nov 2009 00:46:19 +0000

There is now a beta of the utility available from the Sourceforge site. The installer isn’t how I’d have done it but it works. Report any issues to the Sourceforge forum or even the Sparx Systems forum.

Comment on Filtered Debug Viewer tech tool released by Hearn Garage » Blog Archive » Updated Filtered Debug View tool posted

Hearn Garage » Blog Archive » Updated Filtered Debug View tool posted — Sat, 17 Oct 2009 01:24:15 +0000

[...] on the drive for ages so I pakcaged it up this morning and posted an update. Check out the original post for [...]

Comment on TEAC Legacy 800 Review by adam

adam — Tue, 03 Feb 2009 21:02:42 +0000

The amplifier has recently failed. Powering on it displays ‘Protect’ before shutting off again. I left it powered off for an evening and then it wouldn’t switch on at all (it was continuosly trying mind you). I’m guessing it’s a fault with the PSU but I’ll try to get a friend to look at it. Shame the amp was the best bit about this system!

Comment on Remote Wake On LAN? by adam

adam — Sat, 13 Dec 2008 09:52:24 +0000

Have now lost the remote wake up facility as the ISP has locked down the [free] router and I no longer have Telnet acess.

Comment on Remote Wake On LAN? by adam

adam — Fri, 11 Jul 2008 12:17:50 +0000

Having changed ISPs I’m now using a different router. Like the D-Link the new one didn’t have direct support for WOL. However after adding support for telnet access and performing similar steps the new one is just as useful!

Comment on Small tool released – DeskMenu.NET by adam

adam — Wed, 09 Jul 2008 11:11:41 +0000

Release updated to fix a small bug.

Comment on Hello world! by adam

adam — Sat, 19 Jan 2008 16:24:20 +0000

Added the excellent ‘NextGEN Gallery’ to the site. This is so much better than what I had before and others I tried integrate with the new site.

Comment on TDK CD DVD Label Printer Review by Adam Montgomery

Adam Montgomery — Wed, 29 Jan 2003 10:30:35 +0000

Just a quick one on the cd printer review. I’ve just finished my 1st cartridge and decided to take it apart – as I do with most things
I got a total of 50 ‘prints’ out of the cartridge. The design would appear so that no matter how much of the available area you print it always winds on the same amount of tape – what a waste. So if you were to print top & bottom labels on each CD you will only get 25 per cartridge. At prices ranging anything from £6.50 to £9 a replacement I think this is makes it a pretty expensive way of labelling CDs… seems to me like yet another consumables scam – shame on you TDK